Epoxy floors Ohio
Epoxy floors Ohio are commonly
used in industrial and commercial flooring. Epoxy Floor Ohio is normally applied on top of concrete creating a high-performance, durable and smooth
surface that can withstand heavy loads and last for many years. Many industrial
facilities, warehouses, as well as commercial buildings, depend on epoxy floors
Ohio because they are easy to clean and are safe for workers, inventory and
equipment.
Epoxy Floor Ohio coating Preparation
·
Before you apply the coating, make sure that the concrete surface is clean and semi-porous. It cannot bond on a covered or concrete which is polished. You must make sure
that the concrete is fully cured and make sure that you search and repair holes
which are on the concrete surface. Also,
you have to remove any available grease and oil.
·
In case that the concrete is old, conduct
testing on the concrete surface to identify any previous layer covering the
concrete surface. You can do this by
pouring water on the floor. If the floor
does not absorb that water, then it is
likely that the concrete is sealed and that means it is not suitable for epoxy
floor Ohio coating.
·
Also, you
have to make sure that the room temperature as recommended by the manufacturer. The unfavorable temperature will make
the coating to bubble and peel. Epoxy is a mixture of liquid and other
chemicals and after the mixture, your
time is limited, so you have to apply it
quickly before it becomes stiff and hard.
Epoxy primer formulas
It depends on the type of product
that you are using; you might have to use an epoxy primer and finisher coat. You
will add the primer just like normal paint, and
you have to allow it to dry for several hours before applying the epoxy. In order to apply
the primer, you have to cover the floor
with a thin layer of water and then spread the primer
evenly using a roller pin on a pole evenly
on an entire floor. Apply the finisher using
the same formula.
Advantages of Epoxy floor Ohio coating
·
They create a shiny-gloss floor surface adding
more brightness inside your building.
·
It creates a hard layer that is durable and
resistant to tear and wear capable of withstanding heavy loads and continuous
traffic.
·
It is easy and quick to apply, does not require
layout, cutting, extra chemicals or special equipment.
·
It lasts longer,
and you can clean it easily.
·
It is the best option for warehouses and
industries.
·
It is waterproof
and stain resistant.
·
It gives offers you a choice to mix it with
paint and colors so as to hide cracks and
holes.
·
It is good
for safety when mixed with anti-slip additives which make the floor surface a
bit rough to prevent slipperily.
·
It decreases the maintenance cost since it does
not require regular maintenance.
Comments
Post a Comment